EQDIRect for NEQ and EQ mounts
30 June 2025
The GOTO controller is extremely convenient and practical to use, when you want to look at interesting night sky
Category: 3D Printing
The GOTO controller is extremely convenient and practical to use, when you want to look at interesting night sky
During an astrophotography session in outdoors, smowhere in the field, especially in spring or autumn, there is dew.
A wet lens makes photography impossible, so you need to take care of the possibility of drying the lens and even better, prevent dew during the photo session.
A heater-tape powered from the USB port of the powerbank, is ideal for reducing dew on the lens and even eliminating it totally.
You can find many different power banks on the market. Unfortunately, none of them met my personal expectations in terms
Astroberry power supply DIY: compact 84 W 12 V/7 A PSU for Raspberry Pi‑based Astroberry setups. Mains‑powered design with full protections, specs and build details.
Laser collimator modification – Workshop guide (DIY): Power supply modification for a laser collimator (Baader Mark III type). Eliminating the voltage drop issue of button cells in freezing temperatures by installing an external power source, ensuring a stable and sharp laser beam throughout the session.
All content on this site is subject to legal protection under the provisions of the Act of February 4, 1994 on Copyright and Related Rights (consolidated text of 2006, gov. Journal of Laws No. 90, item 631, as amended). ). Without the author’s consent, it is forbidden, among others content reproduction, copying, reprinting, storage and processing by any electronic means, in whole or in part.
Further dissemination referred to in art. 25 paragraph 1 point b of the Act of 4 February 1994 on copyright and related rights. Copying, processing, distributing these materials in whole or in part without the author’s consent is prohibited.